Workshop manual · VW Polo 6R/6C
7-speed DSG gearbox 0AM (DQ200)
Workshop manual for the 7-speed dual clutch gearbox 0AM (DQ200) with dry clutches, as fitted to the VW Polo 6R/6C, procedure by procedure: the dual clutch K1/K2 and its engaging bearings, the mechatronic unit J743, gearbox oil, parking lock and oil seals, with torque settings.
- 40 procedures
- 260 drawings
- 22 torques
No procedure matches your search.

The DQ200 in the Polo
The 0AM is VW's DQ200: a 7-speed DSG with two dry clutches and a separate oil circuit for the mechatronic unit. The Polo 6R and 6C have it with the 1.0, 1.2, 1.4 and 1.8 TSI, the 1.4 MPI and the 1.4 and 1.6 TDI engines; which gearbox code goes with which engine.
The faults met most often are a worn clutch (judder when pulling away, slipping in the odd gears of clutch K1) and the mechatronic unit J743 (pressure lost, the pump running on, gears dropping out, fault codes P189C and P0841). Symptoms, causes and repair options: common problems of the Polo 6R/6C: DSG7 DQ200 failures.
Most common jobs
Repair groups
- General, Technical DataGearbox code, layout, oil capacities, safety, towing, repair rules and the diagnostic tester8 procedures
- ClutchDual clutch K1/K2 removing and installing, engaging bearing shims and clutch-side seals12 procedures
- Controls, HousingGearbox oil, mechatronic unit J743, shift forks and the assembly stand9 procedures
- Gears, ShaftsGears and shafts, parking lock4 procedures
- Final Drive, DifferentialDrive shaft and flange shaft oil seals7 procedures
How it works
General, Technical Data
8 procedures
Group page →Clutch
12 procedures
Group page →Dual Clutch, Removing and Installing, through Transmission Production Date 05/2011
- Overview – Dual Clutch, through Transmission Production Date 05/2011
- Dual Clutch, Removing, through Transmission Production Date 05/2011
- “K 1” and “K 2” Clutch Engaging Bearing Position, Adjusting, Transmission Production Date through 05/2011
- Dual Clutch, Installing, Transmission Production Date through 05/2011
Dual Clutch, Removing and Installing, from Transmission Production Date 06/2011
Clutch-Side Seals, Removing and Installing
Special Tools
Controls, Housing
9 procedures
Group page →Transmission Fluid, Replacing
DSG Transmission Mechatronic J743
- DSG Transmission Mechatronic J743 Safety Precautions
- Overview – Mechatronic
- DSG Transmission Mechatronic J743, Removing with Transmission Installed
- DSG Transmission Mechatronic J743, Moving into »Removal Position« by Hand
- DSG Transmission Mechatronic J743, Installing
- Overview – Shift Forks with Mechatronic Removed






