Ski and luggage roof box 000071200AA/EA/FA

Fitting and using the genuine Volkswagen ski and luggage roof box 000 071 200 AA/EA/FA: retaining pins, or U-bolts on box-profile roof bars, carrier distance 570–920 mm, securing the load, removal and technical data.

Ski and luggage roof box

Part number:
000 071 200 AA
Vehicle:
Polo 2009– (6R)
Scope of delivery: ski and luggage box (1), retaining pin with fixing (2, 4 pcs), retaining pin (3, 4 pcs), U-bolt (4, 4 pcs), tensioning strap (5, 2 pcs), key (6, 2 pcs), assembly instructions (7), warning sticker (8)
Scope of delivery: ski and luggage box (1), retaining pin with fixing (2, 4 pcs), retaining pin (3, 4 pcs), U-bolt (4, 4 pcs), tensioning strap (5, 2 pcs), key (6, 2 pcs), assembly instructions (7), warning sticker (8)

Dear customer, Thank you for choosing a genuine Volkswagen accessory. The steps described in these fitting instructions and safety information must be closely observed. No liability will be accepted for damage resulting from a failure to comply with these instructions and safety information.

Safety information:

Notes
Notes
  • On closing the lid correctly at all three locks (simultaneous "Clack") the key will move automatically back to the vertical position. The key can only be removed in the vertical (locked) position.
  • Do not turn the key back by hand!
Aligning the box on the basic carrier
Aligning the box on the basic carrier

Aligning the ski and luggage box on the basic carrier

  • Place the ski and luggage box onto the basic carrier with the assistance of a second person.
  • Align the ski and luggage box longitudinally and laterally.
Carrier distance
Carrier distance

Setting distance of carrier

  • Carrier distance when using a VW genuine accessory basic carrier:

    a = min. 570 mm

    max. 920 mm

  • Carrier distance when using a commercially available basic carrier with box profile (securing ski and luggage box using U-bolts):

    a = min. 620 mm

    max. 870 mm

Fitting the box
Fitting the box

Fitting ski and luggage box

  • Position all 4 securing points of mounting -1- so that mark -arrow A- or -arrow B- is central over basic carrier -2-.
Fitting the box, continued
Fitting the box, continued

Continuation: Fitting ski and luggage box

  • Open ski and luggage box.
  • Check that all 4 of the tensioning elements -1- are open (handle folded open).
  • Open cover -3- (-arrow E-).
  • Slide retaining pin with fixing -4- into basic carrier.
  • Slide ski and luggage box onto retaining pin with fixing -4-.
  • Slide retaining pin -2- also into mounting for ski and luggage box.
  • Press handle of tensioning element -1- downwards (opposite direction to -arrow B-).
  • Depress handle approx. 7 times (-arrow D-) to tension tensioning element -1-.
  • Then tighten bolt -5-.
  • Secure cover -3-.
Securing the load
Securing the load

Securing load

  • Guide tensioning strap -1- through lashing eyes -2-, as shown in illustration.
  • Place load in ski and luggage box.
  • Secure load using tensioning straps -1-, as shown in illustration.

Releasing tensioning straps

  • Pull front edge of clasp -3- upwards.
Removing the box
Removing the box

Removing ski and luggage box

  • Press the locking devices (-arrows A-) on the 4 tensioning elements -1- and fold up the handle of the tensioning elements (-arrow B-).
  • The remaining removal process is now basically the reverse sequence of the fitting process.

Environmental note: Often the roof bars/supporting rods with/without attachments are left on the vehicle for convenience, even when not in use. The increased wind resistance increases fuel consumption unnecessarily, so remove roof bars/supporting rods and any attachments when not in use.

General information: Roof transportation must comply with prevailing StVZO (German road traffic regulations) or the regulations applicable in the country. The permissible gross vehicle weight must not be exceeded. Always abide by instructions from the vehicle manufacturer concerning maximum roof load.

Determining the actual roof load:

Weight of roof bars/ supporting rods

+ Weight of ski- and luggage box + Weight of disposable load = actual roof load

Technical data:

  • Weight of attachments: approx. 23 kg
  • Maximum safe load: 75 kg

Key number: Record your key number here to facilitate its replacement in event of loss:

FH

Supply of spare parts: To insure a quick response and to avoid timeconsuming checking please always quote the BA No. when ordering spare parts. This BA No. is given on a sticker inside the upper section of the ski- and luggage box (1).

BA No.

Care instructions: Keep the ski- and luggage box clean and well maintained, particularly during the winter months. For cleaning use a solution of water and commercial detergent without alcohol, chlorine or ammonia based additives. These substances will damage the surface of the ski- and luggage box. Please do not use commercial cockpit sprays for cleaning the skiand luggage box. Locks should be lubricated with a spray lubricant, which should not be sprayed onto the plastic surface.