This workshop teaching aid complements the previously published self-study brochures:
- SSP No. 56, six-speed automatic transmission 02E
- SSP No. 75, seven-speed automatic transmission 0AM
Important technical modifications are described in this brochure, which have been carried out since the publication of the above mentioned SSP.
The main part of the teaching aid is dedicated to describing the correct implementation of the diagnosis of the automatic gearboxes 02E and 0AM, finding the causes of problems and faults that can occur when operating vehicles with these gearboxes, as well as determining the procedure for their rectification, including references to the corresponding maintenance documentation.

You will find the instructions for the installation and removal, repair, diagnosis as well as detailed user information in the diagnostic units VAS and in the onboard literature.
The time for going to press was on the 6/2012.
This brochure is not subject to an update.
Chapters
- Comparison of the automatic gearboxesGears, torque, clutch, oil circuit, oil pump, oil quantity and oil change interval of the 0AM (DQ 200) and the 02E (DQ 250) side by side.
- Modification of the clutches as of 01.06.2011 (PKO2 package)The changes to the 0AM clutch: cut-off levers, bearings, the dual-clutch housing and the lever cover, and why the new clutch cannot replace the old one.
- Diagnosis of the automatic gearbox 0AMThe operating modes of the diagnostic unit, what the gearbox electronics offers and when the basic setting is needed.
- Measured value blocks of the gearbox 0AMWhich blocks to read on the 0AM: pressures, clutch positions, play and wear of K1 and K2.
- Faults of the gearbox 0AM and their rectificationCommon 0AM faults, from jerking at start-up to gears that do not shift: assessment, cause and solution with its TPI number.
- Diagram of the recommended procedure for repairing the seven-speed gearbox 0AMThe order of work on a 0AM complaint, from checking the engine through the TPI and the basic setting to a DISS request.
- Diagnosis of the six-speed automatic transmission 02EThe operating modes of the diagnostic unit on the 02E, the functions of the gearbox electronics and when the basic setting is needed.
- Measured value blocks of the gearbox 02EWhich blocks to read on the 02E: switches, speeds, clutch currents and pressures, adjuster paths, oil temperatures and the environmental conditions.
- Faults of the gearbox 02E and their rectificationCommon 02E faults, from jerky shifting to delayed acceleration: assessment, cause and solution, with the table of engagement codes.
- Diagram of the recommended procedure for repairing the six-speed gearbox 02EThe order of work on a 02E complaint, with the check for impurities in the oil before the basic setting.
- Technical request for repairing the gearboxes 0AM or 02ESixteen questions on what a DISS technical request for a DSG gearbox must contain and how to describe the fault, with the answers.
- Checklist of the fault description for DSG gearboxesWhat a DISS technical request for a DSG gearbox must include, and the checklist form for describing the fault.









