7-speed DSG gearbox 0AM (DQ200) · General, Technical Data · General Repair Information

Working with Vehicle Diagnostic Testers

⇒ 7.3.1 Adapting Installation Information

⇒ 7.3.2 Mandatory Reporting Measurements, Reading

⇒ 7.3.3 Basic Measurement, Performing

  • Use only Volkswagen Vehicle Diagnostic Tester.
  • Vehicle Diagnostic Tester
  • Vehicle Diagnostic Tester
  • Vehicle Diagnostic Tester

The Guided Functions button and the Guided Fault Finding button offer various functions. The 3 most important functions are:

  • Adapting Installation Information
  • Mandatory Reporting Measurements, Reading
  • Basic Measurement, Performing

7.3.1 Adapting Installation Information

The Mechatronic recognizes other control modules in the vehicle by signals from the Data bus. Pressing the adapt installation information button tells the Mechatronic to forget all communication partners.

All »active partners« are recognized the next time the ignition is turned on.

Faults cannot be »generated« with this function. Always use the

Adapt installation information after the following tasks:

  • After installing a gearshift mechanism.
  • After a different control module is installed, for example, engine, ABS or Gateway.
  • After working on the steering wheel paddle.

7.3.2 Mandatory Reporting Measurements, Reading

It is necessary to upload the measurements before contacting the Technical Service Center or the importer.

Save the measurements in the diagnostic log so that all the necessary transmission data is available for analyzing the faults.

7.3.3 Basic Measurement, Performing

This is how the Mechatronic learns the important settings. Also important adjustments are learned new or reset to the pre-programmed points. Among others, these are the synchronizing points and the »corner points« for the engaging lever and the gear selector.

  • Press the J743 perform Mechatronic basic measurement screen button only:
  • If “Guided Fault Finding” requests it
  • after having corrected a fault stored in the DTC memory
  • after have installed a dual clutch
  • or after having installed a Mechatronic