1.6 TDI CR engine (EA189) · Mixture preparation – injection · Injection system

Filling/bleeding fuel system

  • Switch on ignition.
  • Connect vehicle diagnostic tester and carry out guided function “Actuating fuel pump”.
  • After completion of the function start the engine.
  • After filling fuel system, leave the engine running at moderate speed for a few minutes and then switch it off again.
  • Checking fuel system for leaks ⇒ 1.4 Checking fuel system for leaks
  • Read out event memory and, if necessary, delete the event memory entry ⇒ Vehicle diagnostic tester.
  • Test drive the vehicle extensively, accelerating to full throttle at least once. Then check high-pressure part of fuel system again for leakage.
  • Read event memory again.