1.6 TDI CR engine (EA189) · Mixture preparation – injection · Senders and sensors
Checking fuel pressure regulating valve N276
- Engine at operating temperature.
- Air conditioner switched off
- Remove engine cover panel ⇒ 3 Engine cover panel.

- Pull off fuel return line -2-.

- Seal open fuel return line connection with a blanking plug -1-.
- Connect fuel return line -2- to suitable hose -3-.

- Hold the end of this hose -1- in a suitable container -2- to measure the return flow rate.
- Check with engine running
- Start engine and run at idling speed.
- Specified amount in 30 seconds: ≥75 ml
If the specification is not attained, the fuel pressure regulating valve - N 276- is defective.
- Check with engine running
If condition in 1) is met, increase engine speed ≥ 2000 revs/min.
- Specification: return volume 0 ml
- Droplets are allowed
- If the specification is not attained, the fuel pressure regulating valve - N 276- is defective.
- If it is no longer possible to start engine
Carry out check with starting speed.
- Specification: return volume 0 ml
- Droplets are allowed
- If the specification is not attained, the fuel pressure regulating valve - N 276- is defective.