Body repairs – exterior · Bonnet, rear lid · Bonnet (hood)
Bonnet – assembly overview and fastening
- 1 Bonnet (hood)
- Removing and installing ⇒ 1.4 Removing and installing bonnet
- Adjusting ⇒ 1.5 Adjusting bonnet
- 2 Adjusting buffer
- Left and right
- Qty. 2 on each side
- 3 Dampers
- Removing and installing ⇒ 1.12 Removing and installing insulation
- 4 Hinge
- Removing and installing ⇒ 1.11 Removing and installing hinges
- Adjusting ⇒ 1.5 Adjusting bonnet
- 5 Support rod
- Removing and installing ⇒ 1.13 Removing and installing support rod
- 6 Bonnet lock
- 7 Hexagon nut
- Qty. 2 on each side for securing bonnet.
- Qty. 2 on each side for securing hinge.
- Specified torque: 20 Nm
- 8 Washer jets
- Removing and installing ⇒ Electrical system; Rep. gr. 92; Windscreen wiper system; Removing and installing washer jets.
- 9 Clip
- Qty. 10
- For securing insulation.
- 10 Striker