Body repairs – exterior · Bonnet, rear lid · Rear lid
Rear lid – assembly overview and fastening
- 1 Rear lid
- Removing and installing ⇒ 2.4 Removing and installing rear lid
- Adjusting ⇒ 2.6 Adjusting rear lid
- 2 Adjusting buffer
- Left and right
- Adjusting ⇒ 2.8 Adjusting adjusting buffer
- 3 Hinges
- Removing and installing ⇒ 2.11 Removing and installing hinges
- 4 Gas strut
- Removing and installing ⇒ 2.14 Removing and installing gas strut
- Releasing gas ⇒ 2.15 Releasing gas from gas strut
- 5 Stop
- For adjustment buffer.
- Left and right
- 6 Seal
- Removing and installing ⇒ 2.13 Removing and installing rear lid seal
- 7 Striker
- Removing and installing ⇒ 2.12 Removing and installing striker pin
- Adjusting ⇒ 2.7 Adjusting striker pin
- 8 Bonnet lock
- Removing and installing ⇒ 2.9 Removing and installing bonnet lock
- 9 Release element
- Removing and installing ⇒ 2.10 Removing and installing operating mechanism