Removing and installing wind deflector

Removing

• Open glass panel completely.
• Press wind deflector net -2- downwards -arrows a- to remove tension from it and hold it down.
• Pull welting -3- out of assembly frame -arrows b-.
• Remove bolts -4- on left and right.
• Pull wind deflector off assembly frame -arrow c-.

Installing

• Push wind deflector into assembly frame.
• Insert and tighten bolts -4- on left and right, specified torque: 1.5 Nm.
• Press wind deflector net -2- downwards -arrows a- to remove tension from it and hold it down.
• Press welting -3- into assembly frame.