1.6 TDI CR engine (EA189) · Cylinder head, valve gear · Cylinder head
Cylinder head cover – assembly overview and fastening
- 1 5 Nm
- 2 High-pressure accumulator
- With injection lines
- Do not attempt to bend injector pipes to a different shape.
- 3 22 Nm
- 4 Injector (piezo injector)
- Removing and installing ⇒ 3.5 Removing and installing injectors
- 5 8 Nm +270° further
- Renew
- 6 Clamping piece
- One clamping piece ⇒ 3.1 Assembly overview - injectors for 2 injectors ⇒ 3.5 Removing and installing injectors
- 7 Bush
- Fastening for high-pressure accumulator
- Renew if damaged
- 8 Seal
- Renew
- 9 Seal
- Renew
- 10 Cap
- 11 Cylinder head cover
- Removing and installing ⇒ 1.4 Removing and installing cylinder head cover
- 12 Seal
- Renew if damaged or leaking.
- 13 10 Nm
- Observe tightening sequence ⇒ 1.4 Removing and installing cylinder head cover
- 14 Wiring guide
- 15 Heat shield
