1.6 TDI CR engine (EA189) · Cylinder head, valve gear · Inlet and exhaust valves

Inlet and exhaust valves

4.1 Valve dimensions

Inlet and exhaust valves: drawing 1
DimensionInlet valveOutlet valve
∅ a mm26.50 … 26.7024.4 … 24.60
∅ b mm5.968 … 5.9825.958 … 5.972
c mm99.3099.10
α ∠°4545

4.2 Reworking valve seats

4.3 Checking valve guides

Special tools and workshop equipment required

  • Universal dial gauge holder - VW 387-
  • Dial gauge
Inlet and exhaust valves: drawing 2
  • Insert new valve into guide. The end of the valve stem must be flush with the guide. On account of differing stem diameters, only use inlet valve in inlet guide and exhaust valve in exhaust guide.
  • Determine rock. Wear limit: max. 1.3 mm
  • Cylinder head must be renewed if rock exceeds wear limit.

4.4 Checking valves

  • Check for scoring on valve stems and valve seat surfaces.
  • Exchange valve if significant scoring can be seen.