1.6 TDI CR engine (EA189) · Crankshaft group · Cylinder block (pulley end)
Poly V-belt drive – assembly overview and fastening
⇒ 1.1.1 Assembly overview - poly V-belt drive with tensioning roller and air conditioner compressor
⇒ 1.1.2 Assembly overview - poly V-belt drive with tensioning element and air conditioner compressor
⇒ 1.1.3 Assembly overview - poly V-belt drive without air conditioner compressor
1.1.1 Assembly overview - poly V-belt drive with tensioning roller and air conditioner compressor
- 1 Poly V-belt
- Check for wear
- Before removing, mark direction of rotation with chalk or felt-tipped marker pen.
- Removing and installing: vehicles with air conditioner compressor and tensioning roller ⇒ 1.1.1 Assembly overview - poly V-belt drive with tensioning roller and air conditioner compressor
- Do not kink
- When installing, make sure it is properly seated on poly V-belt pulleys.
- 2 Tensioning roller for poly V- belt
- Removing and installing ⇒ 1.2.2 Removing and installing poly V-belt, poly V-belt drive with tensioning roller and air-conditioning compressor
- Coat guide surfaces in ancillary bracket with lubricating paste; lubricating paste ⇒ Electronic Parts Catalogue (ETKA).
- 3 Vibration damper
- With poly V-belt pulley
- Installation position: hole in vibration damper must align over protrusion on crankshaft pulley.
- Removing and installing ⇒ 1.4 Removing and installing vibration damper
- 4 Bolt
- Renew
- Only use genuine bolts ⇒ Electronic parts catalogue (ETKA).
- 10 Nm + 90°
- 5 Dowel sleeve
- Check for correct seating in ancillary bracket.
- 6 Ancillary bracket
- Removing and installing ⇒ 1.5 Removing and installing bracket for ancillaries
- 7 Alternator
- Removing and installing ⇒ Electrical system; Rep. gr. 27; Alternator; Removing and installing alternator
- 8 Air conditioner compressor
- Removing and installing ⇒ Heating, air conditioning; Rep. gr. 87; Air conditioner compressor; Removing and installing air conditioner compressor
- 9 Dowel sleeve
- Check for correct seating in ancillary bracket.
- 10 Bolt
- Specified torque and tightening sequence ⇒ 1.2.2 Removing and installing poly V-belt, poly V-belt drive with tensioning roller and air-conditioning compressor
1.1.2 Assembly overview - poly V-belt drive with tensioning element and air conditioner compressor
- 1 Poly V-belt
- Mark direction of rotation before removing
- Check for wear
- Do not kink
- Removing and installing ⇒ 1.2.3 Removing and installing poly V-belt, poly V-belt drive with tensioning element and air-conditioning compressor
- 2 Poly V-belt tensioning element
- Swing with open-end spanner to slacken poly V-belt ⇒ 1.2.3 Removing and installing poly V-belt, poly V-belt drive with tensioning element and air-conditioning compressor
- 3 Belt pulley and vibration damper
- Offset holes make assembly possible in one position only
- 4 Bolt
- Renew
- Only use genuine bolts ⇒ Electronic parts catalogue (ETKA).
- 10 Nm + 90°
- 5 Dowel sleeves
- Check for correct seating in ancillary bracket.
- 6 Bracket
- For ancillaries
- Removing and installing ⇒ 1.5 Removing and installing bracket for ancillaries
- 7 20 Nm + turn 90° further
- 8 Alternator
- Removing and installing ⇒ Electrical system; Rep. gr. 27; Alternator; Removing and installing alternator
- 9 Air conditioner compressor
- Removing and installing ⇒ Heating, air conditioning; Rep. gr. 87; Air conditioner compressor; Removing and installing air conditioner compressor
- 10 Dowel sleeves
- Check for correct seating in ancillary bracket.
1.1.3 Assembly overview - poly V-belt drive without air conditioner compressor
- 1 Belt pulley and vibration damper
- Fitting possible in one position only. The holes are offset.
- Removing and installing ⇒ 1.4 Removing and installing vibration damper
- 2 Alternator
- Removing and installing ⇒ Electrical system; Rep. gr. 27; Alternator; Removing and installing alternator
- 3 Ancillary bracket
Removing and installing ⇒ 1.5 Removing and installing bracket for ancillaries
- 4 Poly V-belt
- Renew.
- Removing and installing ⇒ 1.2 Removing and installing poly-V belt
Tightening torques on this page
3 torques
1.1.1 Assembly overview - poly V-belt drive with tensioning roller and air conditioner compressorTo the drawing ↑
1.1.2 Assembly overview - poly V-belt drive with tensioning element and air conditioner compressorTo the drawing ↑


