1.6 TDI CR engine (EA189) · Crankshaft group · Pistons and conrods

Separating new conrod

Separating new conrod: drawing 1

On new conrods it is possible that the breaking point is not fully separated. When the conrod bearing cap cannot be removed by hand, proceed as follows:

  • To avoid damage, gently clamp conrod in a vice with protection jaws, as shown in illustration.
  • Clamp conrod below dashed line.
  • Unscrew bolts -arrows- around 5 turns.
Separating new conrod: drawing 2
  • Using a plastic hammer, carefully knock against conrod bearing cap -arrow- until it is loose.