1.6 TDI CR engine (EA189) · Crankshaft group · Pistons and conrods
Removing and installing pistons
Special tools and workshop equipment required

- Pin - VW 222 A-
- Piston ring clamp, commercially available
Removing
- Engine secured to engine and gearbox support ⇒ 1.3 Securing engine on engine and gearbox support
- Removing cylinder head ⇒ 15 – Cylinder head, valve gear
- Mark installation position and allocation of conrod bearing caps to conrods as an aid for reinstalling ⇒ 4.1 Assembly overview - pistons and conrods.
- Unscrew conrod bearing cap.
- Withdraw piston upwards together with conrod.
- Remove retaining ring from piston pin eye.
- Drive out piston pin using drift - VW 222 A-.
Installing
Install in reverse order of removal, observing the following.
- Specified torques ⇒ 4.1 Assembly overview - pistons and conrods.
- Oil running surfaces of bearing shells.
- Install piston with piston ring clamp.
Installation position:
- Piston ⇒ 4.1 Assembly overview - pistons and conrods
- Bearing shells in conrods ⇒ 4.1 Assembly overview - pistons and conrods.
- Install conrod bearing cap in accordance with marking.
- Install cylinder head ⇒ 15 – Cylinder head, valve gear.