Body repairs – exterior · Rear doors, door components · Door components

Removing and installing door handle bracket

Removing

Remove rear door trim ⇒ General body repairs, interior; Rep. gr. 70; Rear door trims; Removing and installing rear door trim.
Remove cover ⇒ 2.8 Removing and installing inner door cover.
Remove cap ⇒ 2.10 Removing and installing cap and door handle ⇒ 2.11 Removing and installing door handle.
Unscrew bolt -4- and remove seal -3-.
Remove mounting bracket -1- from door -arrow a-.

Release Bowden cable

Release holding device -5- and take it out of mounting in mounting bracket -arrow b-.
Remove cable bolt from mounting -arrow c-.
Remove cable from mounting bracket -arrow d-.

Installing

Installation is carried out in the reverse sequence of removal.