Body repairs – exterior · Front doors, door components, central locking · Door
Door – assembly overview and fastening
- 1 Door
- Removing and installing ⇒ 1.4 Removing and installing door
- Adjusting ⇒ 1.6 Adjusting door
- 2 Multi-point socket head bolt
- 32 Nm
- Always renew bolts after loosening.
- 3 Door hinge
- The hinge is split.
- Upper part: secured to lower part of hinge with bolt -4-.
- 4 Bolt
- This bolt must be removed from hinge to remove door
- 23 Nm
- 5 Multi-point socket head bolt
- Installed from inside vehicle.
- Remove lower A-pillar trim ⇒ General body repairs, interior; Rep. gr. 70; Trims, interior; Removing and installing A- pillar trim.
- 32 Nm
- After renewing A-pillar, other specified torques must be observed ⇒ 1.5 Installing after renewing A-pillar.
- Always renew bolts after loosening
- 6 Door hinge
- Hinge is split.
- Lower part: secured to upper part of hinge with bolt -4-.
- 7 Multi-point socket head bolt
- 32 Nm
- After renewing A-pillar, other specified torques must be observed ⇒ 1.5 Installing after renewing A-pillar.
- Always renew bolts after loosening
- 8 Bolt
- 30 Nm
- Unscrew and remove this bolt to remove the door.
- 9 Door arrester
- 10 Bolt
- Qty. 2
- 9 Nm
- For door arrester
- 11 Multi-point socket head bolt
- Installed from inside vehicle.
- To loosen or tighten bolt on driver side, remove and install dash panel ⇒ General body repairs, interior; Rep. gr. 70; Dash panel; Removing and installing dash panel.
- To loosen or tighten bolt, remove or install glove compartment on front passenger side ⇒ General body repairs, interior; Rep. gr. 68; Compartments/covers; Removing and installing glove compartment.
- 32 Nm
- After renewing A-pillar, other specified torques must be observed ⇒ 1.5 Installing after renewing A-pillar.
- Always renew bolts after loosening
- 12 Door hinge
- Lower part: secured to upper part of hinge with bolt -16-.
- Hinge is split.
- 13 Multi-point socket head bolt
- 32 Nm
- After renewing A-pillar, other specified torques must be observed ⇒ 1.5 Installing after renewing A-pillar.
- Always renew bolts after loosening
- 14 Multi-point socket head bolt
- 32 Nm
- Always renew bolts after loosening.
- 15 Door hinge
- Upper part: secured to lower part of hinge with bolt -12-.
- Hinge is split.
- 16 Bolt
- 23 Nm
- This bolt must be removed to remove door from hinge pin.
