Body repairs – exterior · Front doors, door components, central locking · Door components

Insulation – assembly overview and fastening

⇒ 2.3.1 Assembly overview – insulation, 2-door model

⇒ 2.3.2 Assembly overview – insulation, 4-door model

2.3.1 Assembly overview – insulation, 2-door model

  • 1 Dampers
    • Self-adhesive
    • Installing:
    • Cut to size as required and fit above side impact protection.
    • Warm using hot air blower - V.A.G 1416- and push on to outer door panel with force.
  • 2 Caps
    • Qty. 4
    • May also be designed as self-adhesive film.
  • 3 Cover
    • Self-adhesive
    • If no speaker is installed.

2.3.2 Assembly overview – insulation, 4-door model

  • 1 Dampers
    • Self-adhesive
    • Installing:
    • Cut to size as necessary and position as shown in the illustration.
    • Warm using hot air blower - V.A.G 1416- and push on to outer door panel with force.
  • 2 Caps
    • Qty. 4
    • May also be designed as self-adhesive film.
  • 3 Cover
    • Self-adhesive
    • If no speaker is installed.