SSP 390 The 7-speed Double-clutch Gearbox 0AM

Mechatronic module

Mechatronic unit for direct shift gearbox J743

The mechatronic unit is the central gearbox control unit.

Within it, the electronic control unit and the electrohydraulic control unit are combined to form one component.

The mechatronic unit is flanged onto the gearbox, and is an autonomous unit. It has a separate oil circuit, which is independent of the oil circuit for the mechanical gearbox.

The advantages of this autonomous, compact unit are:

  • Apart from one sensor, all sensors and actuators are contained in the mechatronic unit.
  • The hydraulic fluid is specifically adapted to the requirements of the mechatronic unit.
  • Due to the separate oil circuit, no foreign material from the mechanical gearbox enters into the mechatronic unit.
  • Good low-temperature behaviour, as no compromise has to be made with the requirements of the gearbox in terms of viscosity behaviour.
Mechatronic unit for direct shift gearbox J743 (S390_041)

The mechatronic unit's electronic control unit is the central gearbox control unit. All sensor signals and all signals from other control units come together here, and all actions are performed and monitored by it. 11 sensors are integrated into the electronic control unit; only the gearbox input speed sender G182 is located outside of the control unit. The electronic control unit hydraulically controls and regulates eight solenoid valves for shifting the 7 gears and for actuating the clutch. The electronic control unit learns (adapts) the positions of the clutches and the positions of the gear selectors when a gear is engaged and takes what has been learnt into consideration for further operation of these components.

Location of sensors

Location of sensors (S390_042)
Location of sensors (S390_083)