SSP 390 The 7-speed Double-clutch Gearbox 0AM

Diagnosis

Via the vehicle diagnosis, testing and information system VAS5051 VAS 5051 A/B and VAS5052 VAS 5052, the following operating modes:

  • Guided Fault Finding and
  • Guided Functions

are available.

"Guided Fault Finding" operating mode

A test plan, which can be used to test the following sensors, actuators and the mechatronic unit during operation is contained in "Guided Fault Finding" for the double-clutch gearbox. When testing the sensors and actuators, please observe the instructions in VAS5051 VAS 5051 A/B and VAS5052 VAS 5052.

Sensors

  • E438 Tiptronic switch in steering wheel to shift up
  • E439 Tiptronic switch in steering wheel to shift down
  • G182 Gearbox input speed sender
  • G270 Gearbox hydraulic pressure sender
  • G487 Gear selector movement sensor 1
  • G488 Gear selector movement sensor 2
  • G489 Gear selector movement sensor 3
  • G490 Gear selector movement sensor 4
  • G510 Temperature sender in control unit
  • G612 Gearbox input speed sender 2
  • G617 Clutch travel sender 1
  • G618 Clutch travel sender 2
  • G632 Gearbox input speed sender 1
  • J587 Selector lever sensor control unit

Actuators

  • N433 Valve 1 in gear train half 1
  • N434 Valve 2 in gear train half 1
  • N435 Valve 3 in gear train half 1
  • N436 Valve 4 in gear train half 1
  • N437 Valve 1 in gear train half 2
  • N438 Valve 2 in gear train half 2
  • N439 Valve 3 in gear train half 2
  • N440 Valve 4 in gear train half 2
  • V401 Motor for hydraulic pump

Mechatronic unit

Mechatronic unit defective

  • J743 Mechatronic unit for direct shift gearbox