1.6 TDI CR engine (EA189) · Exhaust system · Exhaust gas recirculation
Removing and installing exhaust gas recirculation cooler
⇒ 4.3.2 Removing and installing exhaust gas recirculation cooler, Polo
4.3.2 Removing and installing exhaust gas recirculation cooler, Polo

- Remove engine cover panel ⇒ 3 Engine cover panel.
- Remove particulate filter ⇒ 2.2 Removing and installing particulate filter.
- Drain coolant ⇒ 1.3 Draining and adding coolant.

- Remove crankcase breather hose -3-.
- Pull vacuum hose -2- off intake hose -1- and move to side. Unclip bracket.
- Completely undo bolt -4- (make sure bolt is captive).
- Unscrew bolt -2-, swing intake hose with intake connection to rear and pull off of turbocharger.

- Unscrew bolts -arrows-.
- Loosen hose clip -1- and remove pulsation damper -2-.
- Remove turbocharger support ⇒ 4.2.1 Removing and installing oil supply line, Polo.
- Release front left wheel housing liner at bottom.
- Unscrew bolts of coolant pipes on right ⇒ 3.2.4 Removing and installing right coolant pipes, Polo.
- Remove coolant pipes from exhaust gas recirculation cooler.
- Collect escaping coolant with drip tray for workshop hoists - VAS 6208-.
- Catch leaking engine oil with used oil collection and extraction unit - V.A.G 1782-.
- Pull vacuum line off vacuum unit ⇒ Item 5 (4.1 Assembly overview - exhaust gas recirculation).
- Disconnect electrical connector from exhaust gas recirculation valve - N18- electrical actuator for exhaust gas recirculation cooler.
- Clamp off coolant supply line and return lines using hose clips up to Ø 25 mm - 3094- at exhaust gas recirculation cooler ⇒ 4.1 Assembly overview - exhaust gas recirculation.
- Disconnect coolant supply line and return lines from exhaust gas recirculation cooler.
- Collect escaping coolant with drip tray for workshop hoists - VAS 6208-.
- Unscrew bolts ⇒ Item 12 (4.1 Assembly overview - exhaust gas recirculation) and remove exhaust gas recirculation cooler.
Installing
- Specified torque ⇒ 4.1 Assembly overview - exhaust gas recirculation.
Install in reverse order of removal, observing the following.