1.6 TDI CR engine (EA189) · Exhaust system · Exhaust gas temperature regulation

Exhaust gas temperature regulation – assembly overview and fastening

3.1.2 Assembly overview - exhaust gas temperature regulation, Polo (LHD)

Assembly overview – exhaust gas temperature regulation: drawing 1

3.1.3 Assembly overview - exhaust gas temperature regulation, Polo (RHD)

Assembly overview – exhaust gas temperature regulation: drawing 2

Tightening torques on this page

10 torques

3.1.2 Assembly overview - exhaust gas temperature regulation, Polo (LHD)To the drawing ↑

Drawing with the item numbers: 3.1.2 Assembly overview - exhaust gas temperature regulation, Polo (LHD)
ItemPartTorqueNotes
2Control cable45 Nm
4Nut9 Nm
10Bolt4.5 Nm
11Bolt8 Nm
12Exhaust gas temperature sender 3 - G495-45 NmThe thread of the exhaust gas temperature sender is coated and must not also be coated with high-temperature paste. · observe procedure.
14Exhaust gas temperature sender 4 - G648-60 NmThe thread of the exhaust gas temperature sender is coated and must not also be coated with hightemperature paste.
15Exhaust gas temperature sender 1 - G235-45 Nm

3.1.3 Assembly overview - exhaust gas temperature regulation, Polo (RHD)To the drawing ↑

Drawing with the item numbers: 3.1.3 Assembly overview - exhaust gas temperature regulation, Polo (RHD)

All except 6:The thread of the exhaust gas temperature sender is coated and must not also be coated with high-temperature paste.

ItemPartTorqueNotes
3Exhaust gas temperature sender 3 - G495-45 Nm
4Exhaust gas temperature sender 4 - G648-60 Nm
6Exhaust gas temperature sender 1 - G235-45 Nmobserve procedure.

All tightening torques in this manual →