1.6 TDI CR engine (EA189) · Exhaust system · Exhaust gas recirculation
Checking changeover for exhaust gas recirculation cooler
Special tools and workshop equipment required

- Hand vacuum pump - VAS 6213-

Procedure
- Remove heat shield sleeve.
- Detach vacuum hose from vacuum unit and connect hand vacuum pump - VAS 6213- in its place.
- Operate hand vacuum pump to create a vacuum.
- The linkage of the changeover for the exhaust gas recirculation cooler moves -arrows-.
If linkage does not move or only moves in jerks:
- Vacuum actuator is defective.
- Changeover flap for exhaust gas recirculation is tight.