1.4 TSI engine (EA211) · Mixture preparation – injection · Senders and sensors
Removing and installing intake manifold sender - GX9-
Intake manifold sender - GX9- consists of:
- Intake air temperature sender 2 - G299-
- Intake manifold pressure sender - G71-
Removing
- Remove air filter housing ⇒ 3.2 Removing and installing air filter housing.
- Release and pull off electrical connector -1-.
- Release fasteners -arrows-.
- Remove intake manifold sender - GX9-.
Installing
Install in reverse order of removal. The following should be observed:
Torque setting
| Component | Torque setting |
| Intake manifold sender - GX9- | 3 Nm |
- Install air filter housing ⇒ 3.2 Removing and installing air filter housing.