1.6 TDI CR engine (EA189) · Cooling · Radiator, radiator fan
Removing and installing radiator cowl with radiator fan
⇒ 4.3.2 Removing and installing radiator cowl with radiator fan V7, Polo
4.3.2 Removing and installing radiator cowl with radiator fan - V7-, Polo
Removing

- Undo bolts -arrows- for air intake -1-. Remove connecting hose -2- from air filter.
- Remove noise insulation:
Polo ⇒ General body repairs, exterior; Rep. gr. 50; Noise insulation; Assembly overview - noise insulation
- Remove connecting hoses to charge air cooler.
- Disconnect connector for radiator fan ⇒ Item 17 (4.1.2 Assembly overview - radiator/radiator fan, Polo).

- Disengage cowling with radiator fan - V7- from locking hook using a suitable tool.
- Push cowling together with radiator fan - V7- upwards out of the mountings and remove downwards.
Detach radiator fan from fan shroud
- Remove connector for radiator fan from retainer.

- Push pins out of spreader rivets -arrows- ⇒ 4.3.2 Removing and installing radiator cowl with radiator fan - V7-, Polo.

- Carefully lift up fan ring on back of cowling using a suitable tool.
- Remove fan ring.

- Unscrew nuts, remove radiator fan.
Installing
Specified torques ⇒ 4.1.2 Assembly overview - radiator/radiator fan, Polo
Install in reverse order.
- Carefully insert fan shroud together with radiator fan - V7- from below and then push into all 4 mountings on radiator from above.
- The fan frame must engage audibly on the right and left at the top.
- Check that it has engaged securely by pulling on it.