1.6 TDI CR engine (EA189) · Cooling · Coolant pipes
Coolant pipes – assembly overview and fastening
⇒ 3.1.2 Assembly overview - coolant pipes, Polo
3.1.2 Assembly overview - coolant pipes, Polo
- 1 Bolt
- 2.7 Nm
- 2 Sleeve
- Not available as a separate part
- 3 Grommet
- Not available as a separate part
- 4 Bracket
- For coolant circulation pump 2 - V178-
- 5 Bolt
- 40 Nm
- 6 Front coolant pipe
- Removing and installing ⇒ 3.2 Removing and installing coolant pipes
- 7 O-ring
- Renew
- 8 Bolt
- 9 Nm
- 9 Right coolant pipes
- Removing and installing ⇒ 3.2.4 Removing and installing right coolant pipes, Polo
- 10 Bolt
- 9 Nm
- 11 Retaining clip
- 12 Radiator outlet coolant temperature sender - G83-
- Removing and installing ⇒ 2.7.3 Removing and installing radiator outlet coolant temperature sender - G83-, Polo
- 13 O-ring
- Renew
- 14 Bolt
- 9 Nm
- 15 Seal
- Renew
- 16 Union
- 17 O-ring
- Renew
- 18 Radiator outlet coolant - G62-
- Removing and installing
- 19 Threaded pin
- 9 Nm
- 20 Bolt
- 9 Nm
- 21 Retaining clip
- 22 Bolt
- 40 Nm
- 23 Coolant circulation pump 2 - V178-
Tightening torques on this page
8 torques
3.1.2 Assembly overview - coolant pipes, PoloTo the drawing ↑
