1.6 TDI CR engine (EA189) · Cooling · Radiator, radiator fan
Removing and installing radiator
⇒ 4.2.2 Removing and installing radiator, Polo
4.2.2 Removing and installing radiator, Polo

Special tools and workshop equipment required
- Refractometer - T10007-
- Drip tray for workshop hoist - VAS 6208-
- Torque wrench - V.A.G 1331/-
- Pliers for spring-type clips - VAS 6362-
- Guide pins - 3411-
Removing
- Set lock carrier to service position ⇒ General body repairs, exterior; Rep. gr. 50; Lock carrier; Moving to and back from service position.
- Remove connecting hoses to charge air cooler ⇒ 2.1.3 Assembly overview - charge air system, Polo.

- To do this, loosen hose clamps on »hot side« of connecting hoses.

- Do do this, loosen hose clamps on »cold side« of connecting hoses.
- Separate connector for radiator fan.

- Remove coolant hoses from radiator at top left, releasing clips -1 and 2- to do so.
- Drain coolant ⇒ 1.3 Draining and adding coolant.

- Disengage fasteners, remove air ducts -1, 2-.

- Unscrew bolts -arrows-.
- Tilt top of radiator slightly backwards.
- Raise radiator, disengage from lower mounting points and push backwards.

Vehicles with air conditioning system
- Unscrew bolts -arrows-.
- Place condenser in bonnet lock latch at front and secure with cable ties to prevent it from falling.
Continued for all vehicles
Disconnecting charge air cooler from radiator

- Push a wide screwdriver into the latch on the left. Turn the screwdriver in order to carefully open the latch of the charge air cooler -1- at radiator.
- Then, pull the charge air cooler on left downwards a little bit.

- Push charge air cooler -1- towards the right out of the locking latch of the radiator -2-.
Installing
Installation is carried out in the reverse order. When installing, note the following:
- Add coolant ⇒ 1.3.2 Filling with coolant.
- Vehicles with air conditioner. Fill air conditioning system with refrigerant ⇒ Air conditioning systems with refrigerant R134a; Rep. gr. 00; Working with air conditioner service station; Filling refrigerant circuit using air conditioner service station.