Brake systems · Brakes – hydraulics · Repairing front brake calipers
Repairing FS III brake calipers
- 1 Dust cap
- Fit onto bleeder valve.
- 2 Bleeder valve, 10 Nm
- Apply thin coat of assembly paste G 052 150 A2 to thread before screwing in.
- 3 Sleeve bearing
- Insert into brake caliper.
- 4 Guide pin, 30 Nm
- 5 Cover caps
- Insert into sleeve bearing.
- 6 Brake caliper
- 7 Sealing ring
- Removing and installing ⇒ 1.2 Removing and installing brake caliper FS III.
- 8 Piston
- Apply thin coat of assembly paste G 052 150 A2 to piston before installing.
- Removing and installing ⇒ 1.2 Removing and installing brake caliper FS III.
- 9 Sealing ring
- Removing and installing ⇒ 1.2 Removing and installing brake caliper FS III.