Brake systems · Brakes – hydraulics · Repairing front brake calipers
Repairing FN 3 brake calipers
- 1 Dust cap
- Fit onto bleeder valve.
- 2 Bleeder valve, 10 Nm
- Before screwing in, apply thin coat of assembly paste - G 052 150 A2- to thread.
- 3 Cover caps
- Insert into sleeve bearing.
- 4 Guide pin, 30 Nm
- 5 Sleeve bearing
- Insert into brake caliper.
- 6 Brake caliper
- 7 Brake carrier
- Bolt onto brake caliper.
- 8 Retaining spring
- Insert with both ends in holes in brake caliper.
- 9 Sealing ring
- Removing and installing ⇒ 1.4 Removing and installing brake caliper piston FN 3.
- 10 Piston
- Removing and installing ⇒ 1.4 Removing and installing brake caliper piston FN 3.
- Apply thin coat of assembly paste - G 052 150 A2- to piston before inserting.
- 11 Deflector cap
- Removing and installing ⇒ 1.4 Removing and installing brake caliper piston FN 3.
- Take care not to damage when inserting piston.