Brake systems · Brakes – hydraulics · Repairing brake lines
Repairing brake lines
The flanging tool for brake lines - VAS 6056- can be used to flange brake lines with an outer pipe diameter of 5 mm without damaging the coating. In certain cases, this allows sections of brake lines to be renewed at less expense.
The use of flanging tool V.A.G. 1356 is not permitted due to the coating and the diameter of the black brake lines.
Special tools and workshop equipment required
- Flanging tool for brake lines - VAS 6056-
- Brake filling and bleeding equipment - VAS 5234-
| Item | Tool | Tool number |
|---|---|---|
| 1 | Flanging tool (including flanging jaws VAS 6056/6) | VAS 6056/1 |
| 2 | Pipe cutter | VAS 6056/2 |
| 3 | Brake line scraper1) | VAS 6056/3 |
| 4 | Set of grips with plastic jaws | VAS 6056/4 |
| 5 | Pipe bending tool | VAS 6056/5 |
| 6 | Special wrench, 6 mm | - |
| 7 | Flanging jaws | VAS 6056/7 |
1) Grub screws (in shaft and at side) are adjusted and must not be readjusted!