Running gear, axles, steering · Steering · Steering column
Removing and installing intermediate steering shaft
Only 6C 2014–2017
Only what differs from ⇒ 2.2 Removing and installing steering column; everything else is as there.
Special tools and workshop equipment required
Removing
- Unscrew bolt -arrow- from universal joint -1- and pull off universal joint in -direction of arrow-.
Installing
- Install in reverse order.
Specified torques
| Component | Specified torque |
|---|---|
| Intermediate steering shaft to steering column ♦ Use a new bolt. | 20 Nm +180° |
| Intermediate steering shaft to steering rack ♦ Use a new bolt. | 20 Nm +180° |