1.6 TDI CR engine (EA189) · Lubrication · Oil filter, oil pressure switch

Removing and installing oil pressure switch F1

Removing

Removing and installing oil pressure switch F1: drawing 1
  • Press release buttons and remove hose -1- for venting crankcase.
  • Move clear vacuum hoses -arrows-.
  • Release hose clips -3- and pull air hose off air filter housing.
  • Unscrew bolt -2-, swing intake hose with intake connection to rear and pull off of turbocharger.
Removing and installing oil pressure switch F1: drawing 2
  • Unscrew bolts -2- and -3-, remove engine lifting eyes -1-.
  • Separate electrical connector -arrow-.
  • Remove oil pressure switch - F1-.

Installing

Install in reverse order of removal, observing the following.

  • Install vacuum line to exhaust gas recirculation cooler.
  • Install intake connection.