Body repairs – exterior · Glazing · Rear windscreen

Rear window – assembly overview and fastening

  • 1 Rear windscreen
  • 2 PUR adhesive sealant
    • Cross section of bead: -width b- = 6.5 mm, -height a- = 10 mm (including precoating, residual material on window glass and window flange).
    • The adhesive bead is butted up against the side edge of the window.
    • Minimum curing period ⇒ 1.1 Minimum curing periods for bonded windows.
  • 3 Body flange
  • 4 Spacer
  • 5 Connectors for window heater
    • Left and right
  • 6 Adhesive bead butt end
    • The butt end of the adhesive bead should be located here.
  • 7 Aerial connections