SSP 308 Direct Shift Gearbox 02E
Input shafts, output shafts and differential
Input shafts
The engine torque is transmitted to the input shafts from multi-plate clutches K1 and K2.

Input shaft 2

Input shaft 2 is shown in relation to the installation position of input shaft 1.
Input shaft 2 is a hollow construction and is joined via splines to multi-plate clutch K2.
The helical gear wheels for 6th, 4th and 2nd gear can be found on input shaft 2. For 6th and 4th gear, a common gear wheel is used.
To measure the speed of this input shaft there is a pulse wheel for input shaft 2 speed sender G502 adjacent to the gear wheel for 2nd gear.
Input shaft 1

Input shaft 1 rotates inside input shaft 2, which is hollow. It is joined to multi-plate clutch K1 via splines. Located on input shaft 1 are the helical gear wheels for 5th gear, the common gear wheel for 1st and reverse gear and the gear wheel for 3rd gear.
To measure the speed of this input shaft there is a pulse wheel for input shaft 1 speed sender G501 between the gear wheels for 1st/reverse gear and 3rd gear.
Output shafts
In line with the two input shafts, the direct shift gearbox also features two output shafts.
Thanks to the common use of gear wheels for 1st and reverse gear and 4th and 6th gear on the input shafts, it was possible to reduce the length of the gearbox.
Output shaft 1

Located on input shaft 1 are
- the three-fold synchronised selector gears for 1st, 2nd, 3rd gears,
- the single synchronised selector gear for 4th gear and
- the output shaft gear for meshing into the differential.
The output shaft meshes into the final drive gear wheel of the differential.
Output shaft 2

Located on input shaft 2 are
- the pulse wheel for gearbox output speed
- the selector gears for 5th, 6th and reverse gears and
- the output shaft gear for meshing into the differential.
Both output shafts transmit the torque further to the differential via their output shaft gears.
Reverse shaft
The reverse shaft changes the direction of rotation of output shaft 2 and thereby also the direction of rotation of the final drive in the differential. It engages in the common gear wheel for 1st gear and reverse gear on input shaft 1 and the selector gear for reverse gear on output shaft 2.

Differential
Both output shafts transmit the torque to the input shaft of the differential.
The differential transmits the torque via the drive shafts to the road wheels.
Integrated in the differential is the parking lock gear.
