SSP 308 Direct Shift Gearbox 02E

Electro-hydraulic control unit

The electro-hydraulic control unit is integrated in the mechatronics module. Housed within the control unit are all the solenoid valves, pressure control valves and hydraulic selectors and the multiplexer.

In addition, there is a pressure release valve on the hydraulic module. It prevents pressure from rising to a level that could damage the hydraulic selectors.

  • N88 Solenoid valve 1 (gear actuator valve)
  • N89 Solenoid valve 2 (gear actuator valve)
  • N90 Solenoid valve 3 (gear actuator valve)
  • N91 Solenoid valve 4 (gear actuator valve)
  • N92 Solenoid valve 5 (multiplexer valve)
  • N215 Pressure control valve 1 (clutch K1)
  • N216 Pressure control valve 2 (clutch K2)
  • N217 Pressure control valve 3 (main pressure)
  • N218 Pressure control valve 4 (cooling oil)
  • N233 Pressure control valve 5 (safety 1)
  • N371 Pressure control valve 6 (safety 2)
  • A Pressure release valve
  • B Printed circuit
Electro-hydraulic control unit (S308_033)

The valves have different selector characteristics depending on their function. There are

  • "yes/no" selector valves and
  • modulation valves

to choose from.

The "yes/no" valves are made up of

  • the gear actuator valves and
  • the multiplexer selector valve.

The modulation valves are made up of

  • the main pressure valve
  • the cooling oil valve
  • the clutch valves and
  • the safety valves.

Once the printed circuit is removed, the gear actuator valves N89, N90 and N91 become visible.

Electro-hydraulic control unit (S308_034)