SSP 308 Direct Shift Gearbox 02E
Diagnosis
On vehicle diagnosis, testing and information system VAS5051 VAS 5051, the following modes of operation:
- Guided fault finding
- Guided functions
can be chosen.
Operating mode "Guided fault finding"
In "Guided fault finding" mode, a test schedule is available for the direct shift gearbox, with which the following sensors, actuators and mechatronics can be tested in operation. Please refer to the instructions on VAS5051 VAS 5051 when testing sensors and actuators.
Sensors
- G93 Gear oil temperature sender
- G182 Gearbox input speed sender
- G193 Hydraulic pressure sender 1
- G194 Hydraulic pressure sender 2
- G195 Gearbox output speed sender 1
- G196 Gearbox output speed sender 2
- G487 Gear actuator travel sensor 1
- G488 Gear actuator travel sensor 2
- G489 Gear actuator travel sensor 3
- G490 Gear actuator travel sensor 4
- G501 Speed sender for input shaft 1
- G502 Speed sender for input shaft 2
- G509 Multi-plate clutch oil temperature sender
- G510 Control unit temperature sender
Actuators
- N88 Solenoid valve 1
- N89 Solenoid valve 2
- N90 Solenoid valve 3
- N91 Solenoid valve 4
- N92 Solenoid valve 5
- N110 Selector lever lock solenoid
- N215 Pressure control valve 1
- N216 Pressure control valve 2
- N217 Pressure control valve 3
- N218 Pressure control valve 4
- N233 Pressure control valve 5
- N371 Pressure control valve 6
Mechatronics
Mechatronics fault
- J743 Mechatronics gear monitoring
- J743 Mechatronics selection monitoring
- J743 Mechatronics power supply
Operating mode "Guided functions"
In "Guided functions" mode, a test schedule is available for the direct shift gearbox, with which the oil level can be checked.