1.4 TSI engine (EA111) · Cooling · Coolant pump, regulation of cooling system

Removing and installing coolant pump belt pulley (Polo, Touran, Golf Plus, Eos, Tiguan, Scirocco, Golf, Golf Cabriolet)

Removing and installing coolant pump belt pulley (Polo, Touran, Golf Plus, Eos, Tiguan, Scirocco, Golf, Golf Cabriolet): drawing 1

Special tools and workshop equipment required

  • Bit XZN 10 - T10154-
  • Hose clamp pliers - VAS 6340-
  • Torque wrench - V.A.G 1331-

Removing

Golf Plus, Eos, Scirocco, Golf, Golf Cabriolet, Touran, Polo

  • Remove noise insulation ⇒ General body repairs, exterior; Rep. gr. 50; Body - front, noise insulation.

Tiguan

  • Depending on vehicle equipment, remove noise insulation or skid plate ⇒ General body repairs, exterior; Rep. gr. 50; Removing and installing noise insulation or skid plate.

Continued for all vehicles

Removing and installing coolant pump belt pulley (Polo, Touran, Golf Plus, Eos, Tiguan, Scirocco, Golf, Golf Cabriolet): drawing 2
  • Pull retaining clip in direction of -arrow- and pull out charge air hose -1- from charge air pipe.
Removing and installing coolant pump belt pulley (Polo, Touran, Golf Plus, Eos, Tiguan, Scirocco, Golf, Golf Cabriolet): drawing 3
  • Unscrew securing bolt for charge air pipe -arrow-.
Removing and installing coolant pump belt pulley (Polo, Touran, Golf Plus, Eos, Tiguan, Scirocco, Golf, Golf Cabriolet): drawing 4
  • Remove securing bolt -arrow- for charge air pipe -1-.
Removing and installing coolant pump belt pulley (Polo, Touran, Golf Plus, Eos, Tiguan, Scirocco, Golf, Golf Cabriolet): drawing 5
  • Release and pull off connector -1- on oil level and oil temperature sender - G266-.
  • Unclip bracket -2- for electric wire to oil level and oil temperature sender - G266-.

Only vehicles with auxiliary heater

  • Remove coolant hoses for auxiliary heater.

Continued for all vehicles

Removing and installing coolant pump belt pulley (Polo, Touran, Golf Plus, Eos, Tiguan, Scirocco, Golf, Golf Cabriolet): drawing 6
  • Carefully press locking tabs on noise insulation housing for supercharger -arrows- outwards.
  • Pull off housing with noise insulation and place to one side.
Removing and installing coolant pump belt pulley (Polo, Touran, Golf Plus, Eos, Tiguan, Scirocco, Golf, Golf Cabriolet): drawing 7
  • Lift engine cover panel at points -1- and pull it forwards in direction of -arrow-.
Removing and installing coolant pump belt pulley (Polo, Touran, Golf Plus, Eos, Tiguan, Scirocco, Golf, Golf Cabriolet): drawing 8
  • Detach fuel supply line -1- and line leading to activated charcoal filter -2- by pressing the release tabs.
Removing and installing coolant pump belt pulley (Polo, Touran, Golf Plus, Eos, Tiguan, Scirocco, Golf, Golf Cabriolet): drawing 9
  • Pull off hose -1- from pressure pipe.
  • Unscrew securing bolts -2- from pressure pipe and remove pressure pipe.
Removing and installing coolant pump belt pulley (Polo, Touran, Golf Plus, Eos, Tiguan, Scirocco, Golf, Golf Cabriolet): drawing 10
  • Unscrew hose clip -1- on charge air pipe.
  • Open hose clip -2- and pull out hose.
  • Unscrew securing bolt for charge air pipe -3-.
  • Remove bracket -4-.
Removing and installing coolant pump belt pulley (Polo, Touran, Golf Plus, Eos, Tiguan, Scirocco, Golf, Golf Cabriolet): drawing 11
  • To do so, remove bolts -arrows-.
  • Remove bracket -1-.
Removing and installing coolant pump belt pulley (Polo, Touran, Golf Plus, Eos, Tiguan, Scirocco, Golf, Golf Cabriolet): drawing 12
  • Unscrew bolts -arrows- and remove charge pressure sender - G31- -1-.
  • Remove charge air pipe downwards.
Removing and installing coolant pump belt pulley (Polo, Touran, Golf Plus, Eos, Tiguan, Scirocco, Golf, Golf Cabriolet): drawing 13
  • Loosen securing bolts -1- for coolant pump pulley.
Removing and installing coolant pump belt pulley (Polo, Touran, Golf Plus, Eos, Tiguan, Scirocco, Golf, Golf Cabriolet): drawing 14
  • Unscrew securing bolts -1- and pull pulley from coolant pump.

Installing

Removing and installing coolant pump belt pulley (Polo, Touran, Golf Plus, Eos, Tiguan, Scirocco, Golf, Golf Cabriolet): drawing 15

Further installation is carried out in reverse order of removal. When installing, note the following:

Specified torques:

Assembly overview - charge air system ⇒ 3.2 Assembly overview - charge air system (Polo)

Assembly overview - intake manifold ⇒ 2.1 Assembly overview - intake manifold.

Removing and installing coolant pump belt pulley (Polo, Touran, Golf Plus, Eos, Tiguan, Scirocco, Golf, Golf Cabriolet): drawing 16
  • Push engine cover panel down at points -1- in direction of -arrow- until it engages.

Tightening torques on this page

1 torque

In the steps

StepTorque
Tighten securing bolts to 24 Nm.24 Nm

All tightening torques in this manual →