1.4 TSI engine (EA111) · Turbocharging/supercharging · Charge air system
Charge air system (Polo) – assembly overview and fastening
- 1 Charge air cooler
- Removing and installing ⇒ 3.14 Removing and installing radiator with charge air cooler (Polo)
- 2 Hose clip, 5.5 Nm
- 3 Charge air hose
- 4 Charge air hose
- 5 Throttle valve module - J338-
- Cleaning ⇒ 2.3 Cleaning throttle valve module - J338-
- If renewed, erase learnt values and adapt engine control unit - J623- ⇒ Vehicle diagnostic tester “Guided functions”.
- 6 7 Nm
- 7 Intake manifold connection
- With seals.
- 8 Charge air pressure sender - G31- with intake air temperature sender 2 - G299-
- 9 10 Nm
- 10 5 Nm
- 11 Mountings
- 12 10 Nm
- 13 10 Nm
- 14 Charge air pipe
- 15 Bracket
- 16 10 Nm
- 17 Charge air pipe
- 18 Charge air hose
- To turbocharger
- 19 Charge air hose