1.4 TSI engine (EA111) · Cooling · Radiator, radiator fan

Removing and installing radiator fan V7 and radiator fan 2 V177 (Polo)

Removing

  • Remove noise insulation ⇒ General body repairs, exterior; Rep. gr. 50; Body - front, noise insulation.
Removing and installing radiator fan V7 and radiator fan 2 V177 (Polo): drawing 1
  • Disconnect electrical connector -arrow-.
Removing and installing radiator fan V7 and radiator fan 2 V177 (Polo): drawing 2
  • Pull connector -arrow- from radiator outlet coolant temperature sender - G83-.
Removing and installing radiator fan V7 and radiator fan 2 V177 (Polo): drawing 3
  • Pull off intake hose -1-.
  • Unscrew securing bolts -arrows- and remove intake cowl.
Removing and installing radiator fan V7 and radiator fan 2 V177 (Polo): drawing 4
  • Press both radiator latches in -direction of arrow-.
  • Carefully remove cowling -1- downwards together with radiator fans.
Removing and installing radiator fan V7 and radiator fan 2 V177 (Polo): drawing 5
  • Disconnect connector -1-.

Depending on which radiator fan is to be removed.

  • Unclip line from line guide and unscrew securing nuts -arrows-.

Installing

Installation is carried out in the reverse order. When installing, note the following:

Specified torques

ComponentNm
Radiator fan to air scoop5