1.4 TSI engine (EA111) · Cooling · Radiator, radiator fan
Radiator/radiator fan (Polo) – assembly overview and fastening
- 1 Radiator/cooler
- Removing and installing ⇒ 3.14 Removing and installing radiator with charge air cooler (Polo)
- After renewing, renew entire coolant ⇒ 1.6 Draining and filling coolant (Polo)
- 2 Spring-type clip
- 3 Coolant hose
- To expansion tank
- 4 Spring-type clip
- 5 Cap
- Check using cooling system tester - V.A.G 1274 B- and adapter for cooling system tester - V.A.G 1274/9-
- The pressure relief valve must open at a pressure of 1.4…1.6 bar
- 6 Expansion tank
- Check cooling system for leaks using cooling system tester - V.A.G 1274 B- and adapter for cooling system tester - V.A.G 1274/8-
- 7 5 Nm
- 8 Connector
- 9 Plastic inserts
- For securing bolts.
- 10 Bracket
- 11 Cowling
- 12 5 Nm
- 13 Radiator fan 2 - V177-
- 14 Connector
- 15 Bracket
- For connector.
- 16 Radiator fan - V7-
- With radiator fan control unit - J293-.
- 17 Charge air cooler
- 18 Spring-type clip
- 19 Lower coolant hose
- To connection for thermostat.
- 20 Radiator outlet coolant temperature sender - G83-