Adjusting handbrake

A new adjustment is only necessary when the handbrake cables, brake backplate or brake linings are renewed.

• Remove centre console extension, ⇒ General body repairs, interior; Rep. gr. 68; Compartments, covers and trims.
• The foot brake must be functional and bled.
• Release handbrake.
• Firmly depress brake pedal three times.
• Pull handbrake lever on 4 notches.

• Tighten adjusting nut -A- until both wheels are difficult to turn by hand.

Adjustment nut -A- must be screwed over end of pull rod -1-.

• Release handbrake and check that both wheels turn freely. If required turn adjustment nuts back slightly.
• Install centre console extension. ⇒ General body repairs, interior; Rep. gr. 68; Compartments, covers and trims.

Due to the automatic rear wheel brake adjustment there is no requirement to adjust the handbrake after making new/initial adjustment.