1.6 TDI CR engine (EA189) · Turbocharging/supercharging · Charge air system

Checking charge air system for leaks

Special tools and workshop equipment required

Checking charge air system for leaks: drawing 1
  • Charge air system tester - V.A.G 1687-
  • Adapter - V.A.G 1687/10-
Checking charge air system for leaks: drawing 2
  • Remove intake hose -1- from air filter.
  • Insert adapter - 1687/10- in intake hose -1- and secure with clip.

Prepare charge air system tester - V.A.G 1687- as follows:

Checking charge air system for leaks: drawing 3
  • Unscrew pressure regulating valve -2- and close valves -3- and -4-.
Checking charge air system for leaks: drawing 4
  • Connect charge air system tester - V.A.G 1687- to adapter - 1687/10- as shown.
Checking charge air system for leaks: drawing 3
  • Connect compressed air hose -1- (compressed air source) to charge air system tester - V.A.G 1687-.
  • Open valve -3-.
  • Adjust pressure to 0.5 bar with pressure regulating valve -2-.
  • Open valve -4- and wait until the test circuit is filled. If necessary readjust pressure to 0.5 bar.
  • Check the charge air system for leaks as follows:
  • by listening
  • by feeling
  • with leak detector spray
  • or with the ultrasonic tester - V.A.G 1842-.