1.4 TSI engine (EA211) · Ignition system · Ignition system

Ignition system – assembly overview and fastening

1 Bolt
- The specified torque influences the function of the knock sensor.
- 20 Nm
2 Knock sensor 1 - G61-
- Removing and installing ⇒ 1.3 Removing and installing knock sensor 1 G61
3 Spark plug
- Remove and install with spark plug socket and extension - 3122 B-
- Specified torque: 22 Nm
- Change interval ⇒ Maintenance tables
- Part numbers ⇒ Electronic parts catalogue (ETKA)
4 Ignition coil with output stage and spark plug connectors

5 Bolt
- 8 Nm
6 Bolt
- 8 Nm
7 Hall sender - G40-
- Removing and installing ⇒ 1.4.2 Removing and installing Hall sender 3 G300
8 O-ring
9 Bolt
- 8 Nm
10 Hall sender 3 - G300-
- Removing and installing ⇒ 1.4.1 Removing and installing Hall sender G40
11 O-ring
- Renew if damaged
12 Sender wheel
- For engine speed sender - G28-
- Removing and installing ⇒ 2.3 Removing and installing sealing flange on gearbox side
13 Sealing flange, gearbox side
- Removing and installing ⇒ 2.3 Removing and installing sealing flange on gearbox side
14 Engine speed sender - G28-
- Removing and installing ⇒ 1.5 Removing and installing engine speed sender G28
15 Bolt
- 4.5 Nm