SSP 094 Diagnosis of the automatic gearboxes 0AM and 02E

Diagnosis of the six-speed automatic transmission 02E

The following operating modes are available when carrying out the self-diagnosis of the gearbox using the diagnostic unit VAS:

  • Controlled fault finding In the operating mode "Controlled fault finding" for automatic gearbox 02E, a test plan is available that allows the senders, actuators and the mechatronics to be checked. When inspecting the senders and the actuators, follow the instructions of the diagnostic unit VAS.
  • Controlled functions In the operating mode "Controlled functions" of the automatic gearbox 02E, a check of the oil level must be carried out.

The gearbox electronics enables the following functions:

  • Inspecting the oil level.
  • Coding the control unit (code 20 for DSG).
  • Checking the gears.
  • Checking the shifting.
  • Basic setting – complete (everything is set).
  • Reading the measured value blocks

Shifting into the basic setting is carried out in accordance with:

  • the replacement of the engine
  • the replacement and the coding of the engine control unit
  • the replacement of the automatic gearbox control unit J217
  • the removal and installation of the gearbox
  • the removal and installation of the electric accelerator pedal