1.6 TDI CR engine (EA189) · Technical data · Repair notes

Checking vacuum system

Special tools and workshop equipment required

Checking vacuum system: drawing 1
  • Hand vacuum pump - VAS 6213-

Procedure

  • Check all vacuum lines throughout entire vacuum system for:
  • Cracks
  • Marten bites
  • Crushing
  • Porous areas and other leaks
  • Check vacuum line to solenoid valve and from solenoid valve to relevant component.
  • If event is entered in memory, check vacuum lines to specified component, but also additionally the other vacuum lines to other components.
  • If pressure cannot be built up using hand vacuum pump - VAS 6213- or pressure immediately drops again, check hand vacuum pump and connecting hoses for leaks.