1.4 TSI engine (EA211) · Exhaust system · Exhaust pipes and silencers

Silencers – assembly overview and fastening

1 Mounting
- Renew if damaged
2 Bolt
- 20 Nm
- Qty. 2
3 Rear silencer
- In initial equipment, component with centre silencer. Can be renewed individually for repair purposes.
- Removing and installing ⇒ 1.3 Removing and installing silencer
- Separating exhaust pipes from silencers ⇒ 1.2 Separating exhaust pipes from silencers
- Aligning exhaust system free of tension ⇒ 1.4 Aligning exhaust system free of stress.
4 Mounting
- Renew if damaged
5 Centre silencer
- Combined in one unit with rear silencer as original equipment. Can be renewed individually for repair purposes.
- Removing and installing ⇒ 1.3 Removing and installing silencer
- Separating exhaust pipes from silencers ⇒ 1.2 Separating exhaust pipes from silencers
- Aligning exhaust system free of tension ⇒ 1.4 Aligning exhaust system free of stress.
6 Clamping sleeve
- Align exhaust system free of tension before tightening ⇒ 1.4 Aligning exhaust system free of stress.
- Fitting position ⇒ 1.1 Assembly overview - silencers
- Tighten threaded connections evenly.
- 23 Nm
7 Mounting
- Renew if damaged

Installation position of rear clamp