Volkswagen Reparaturleitfäden für den Polo V als lesbare Seiten: jeder Arbeitsablauf auf einer eigenen Seite, mit Abbildungen, Anzugsdrehmomenten und Querverweisen.
8 Leitfäden
871 Arbeitsabläufe
3590 Abbildungen
1484 Drehmomente
Kein Arbeitsablauf passt zur Suche.
Die Suche funktioniert auf der veröffentlichten Seite.
Noch keine Reparaturleitfäden auf Deutsch. In anderen Sprachen verfügbar:
Workshop manual for the VW Polo 6R and 6C running gear, procedure by procedure: front and rear suspension, drive shafts, wheels and tyres, wheel alignment and steering, with torque settings; where the two generations differ, both are shown.
Workshop manual for the VW Polo 6R brakes, procedure by procedure: technical data and brake allocation by PR number, ABS/ESP, front and rear brakes, brake calipers, bleeding, brake master cylinder, brake booster and brake lines, with torque settings.
VW Polo V (6R/6C, from late 2009) workshop manual: removing, installing and adjusting exterior body parts – lock carrier, bonnet, rear lid, doors, sunroof, bumpers, glazing and exterior equipment.
Workshop manual for the VW Polo 6R and 6C interior, procedure by procedure: interior equipment, seat belts and airbags, trims, seat frames, padding and covers; where the two generations differ, both are shown.
Workshop manual for the VW Polo 1.4 TSI engine, codes CPTA, CZCA and CZEA (EA211), procedure by procedure: removal, crankshaft group, cylinder head, toothed belt drive, lubrication, cooling, turbocharging, injection, exhaust and ignition, with torque settings.
Workshop manual for the VW Polo 1.2 TDI CR engine, code CFWA (EA189), procedure by procedure: removal, crankshaft group, cylinder head, toothed belt drive, lubrication, cooling, turbocharging, injection, exhaust and glow plugs, with torque settings.
Workshop manual for the VW Polo 1.4 TSI twincharged engine, codes CAVE and CTHE (EA111), procedure by procedure: removal, crankshaft group, cylinder head, timing chain, lubrication, cooling, turbocharger and supercharger, injection, exhaust and ignition, with torque settings. Jobs that differ on other models are in the PDF.
Workshop manual for the VW Polo 6R 1.4 MPI engine, code CGGB (EA111), procedure by procedure: removal, crankshaft group, cylinder head, toothed belt drive, lubrication, cooling, fuel supply, injection, exhaust and ignition, with torque settings. The older engine codes of the Polo 2002 are in the PDF.