Removing and installing poly V-belt (vehicles without air conditioner compressor)

»Carry out the following work sequence«

Removing and installing

• Remove noise insulation ⇒ General body repairs, exterior; Rep. gr. 50; Body - front; Assembly overview - noise insulation.
• Cut through poly V-belt.
• Further work sequence is carried out as described in illustrated instructions.

The illustrated instructions accompany the spare part.

Install in reverse order, noting the following:

On completing work:

• Start engine, and check belt running.
• Secure front part of right wheel housing liner again.
• Install noise insulation ⇒ General body repairs, exterior; Rep. gr. 50; Body - front; Assembly overview - noise insulation.