Removing and installing oil spray jets

Special tools and workshop equipment required

• Allen key, long reach 5 mm - T10545-

Removing

• Remove noise insulation ⇒ General body repairs, exterior; Rep. gr. 66; Noise insulation; Assembly overview - noise insulation.
• Remove front right wheel housing liner ⇒ General body repairs; Rep. gr. 66; Wheel housing liner; Removing and installing front wheel housing liner.
• Remove sump ⇒ 1.3 Removing and installing sump.
• Remove oil pump ⇒ 1.4 Removing and installing oil pump.

• Turn crankshaft via vibration damper securing bolt in direction of engine rotation until the respective bolt is accessible.

• Unscrew pressure relief valve -1- using Torx bit T40 - T10545-.
• Remove oil spray jets -2-.

Installing

• 1 Pressure relief valve - 27 Nm
• 2 Oil spray jet

• Installation position: align leading edge of oil spray jet arrow with machined surface of cylinder block.

• Install oil pump ⇒ 1.4 Removing and installing oil pump.
• Install sump ⇒ 1.3 Removing and installing sump.
• Install front right wheel housing liner ⇒ General body repairs; Rep. gr. 66; Wheel housing liner; Removing and installing front wheel housing liner.
• Install noise insulation ⇒ General body repairs, exterior; Rep. gr. 66; Noise insulation; Assembly overview – noise insulation.