Removing and installing bracket for ancillaries

Special tools and workshop equipment required

• Torque wrench - V.A.G 1331-

Removing

Tiguan

• Depending on vehicle equipment, remove noise insulation or skid plate ⇒ General body repairs, exterior; Rep. gr. 50; Removing and installing noise insulation or skid plate.

Golf Plus, Eos, Scirocco, Golf, Touran, Polo, Sharan, Passat, Passat CC, Golf Cabriolet

• Remove noise insulation ⇒ General body repairs, exterior; Rep. gr. 50; Body - front, noise insulation.

Continued for all vehicles

• Remove poly V-belt (Tiguan).
• Remove poly V-belt (Golf Plus, Eos, Scirocco, Golf, Touran, Polo, Sharan, Passat, Passat CC, Golf Cabriolet) ⇒ 1.3 Removing and installing poly V-belt (Golf Plus, Eos, Scirocco, Golf, Touran, Polo, Sharan, Passat, Passat CC, Golf Cabriolet)
• Remove alternator ⇒ Electrical system; Rep. gr. 27; Removing and installing alternator.
• Remove air conditioner compressor ⇒ Heating, air conditioning; Rep. gr. 87

• Secure air conditioner compressor to lock carrier.
• Ensure that lines are not kinked.

• Unscrew securing bolts -1- and remove bracket.

Installing

• Fit ancillary bracket to cylinder block.

• Tighten securing bolts -1- to 25 Nm.

Specified torque for tensioning element ⇒ Item 13 (1.1 Assembly overview - poly V-belt drive)

Further assembly is basically a reverse of the dismantling sequence.