Removing and installing oil pressure switch - F1-

»Carry out the following work sequence«

Removing

• Remove engine cover panel ⇒ 3 Engine cover panel.

• Detach hose for crankcase breather -3- from cylinder head cover and swing to one side.
• Pull vacuum hose -2- together with bracket off suction hose -1-.
• Pull suction hose -1- off air mass meter.
• Unscrew bolt -4- completely (captive), swing suction hose -1- together with inlet union to rear and pull off from turbocharger.

• Unscrew bolts -2 and 3-, remove engine lifting eye -1-.
• Separate electrical connector -arrow-.
• Remove oil pressure switch - F1-.

Installing

• Specified torques ⇒ 3.1 Assembly overview - oil filter bracket and engine oil cooler.

Install in reverse order, noting the following:

• Install vacuum line to exhaust gas recirculation cooler.
• Install suction hose.